Ediabas Inpa Software Installieren Date

Guys, Just thought I Would let you know about my experience of installing the above. I found it very straight forward following the instructions below and works perfectly on Windows 7 as long as you follow each step. Its not my work below but this was the best and most simplest tutorial that i could find and actually worked first time. I have made some slight updates based on my experiences, regarding the extraction of the downloaded files ( in bold) Assumptions and Clarifications •This setup/installation DOES work on Windows 7 64bit. •This setup/installation does NOT require VM/Virtual Machine images.

•This setup/installation will give you INPA and EDIABAS 6.4.7 and 5.0.2. •This guide assumes that you have a basic knowledge of Windows, Control Panel and Device Manager. Buy a cable I purchased a USB cable from EBay, it came with software but I didn't use it and instead used online resources that I downloaded for which I'll provide links. The cable I purchased is a USB to OBD2 connector that plugs into your BMW to the right hand side of the steering wheel, in the foot-well area. This is the specific cable that I purchased and that I can confirm works: 2. Download the software There are many sources on the internet for INPA/EDIABAS, some seem to work, others do not - I used these specific downloads and they worked perfectly: • • If for any reason the above links are missing/broken, PM me and I'll see what I can do. Thank you to whomever is hosting the above files and I hope that you do not mind me providing these links.

Setup/Configure your OBD2 USB Cable 1.Put the DVD that arrived with the cable into the DVD drive on your PC. 2.Plug in the cable into a USB port on your computer, you must ONLY use this USB port from here-on for this cable. If your computer is connected to the internet it should automatically search and install in the USB cable drivers. If your computer does NOT automatically detect the cable, you may need to use 'Device Manager' to manually update/select the driver.

3.Once installed, go to Control Panel ->System ->Then click on the Hardware tab, then click on Device Manager. 4.Locate the entry 'USB Serial Port' in the 'Ports' section of Device Manager. It should read ‘USB Serial Port (COMX)'. 5.Right-click on the above and select ‘Properties’, then click on the ‘Port Settings’ Tab and then click on ‘Advanced’. 6.Change the 'Com Port Number' entry to 'COM1'. 7.Change the 'Latency Timer (msec)' to '1'.

8.Click on ‘OK’ and close all the windows, restart your PC to confirm all the changes. Install INPA/EDIABAS 6.4.3 and 4.4.7 1.Extract the contents of the downloaded file 'INPA-6.4.3-full.rar' and you'll find a.NRG file. This is a CD image that you'll need to either burn to a CD or mount using Dameon Tools - it wont work if you run it directly from you hard drive- computer has to think its running from a CD.

2.Once extracted, go into the following folder '/REFERENZ/INSTALL/', right-click on 'INSTPROG.exe' and select 'Properties', click on the Compatibility tab and change the dropdown to Windows XP SP3 as the Compatibility Mode, also tick 'Run As Administrator', then click 'Ok', then double-click the file to run the installation. 3.Select 'English' as the language and click 'Next'. 4.Select 'Next' until asked for 'Configuration', scroll to 'BMW Group Rectification Programs UK', click 'Next'. 5.Tick the option 'Complete' for all of the options shown. 6.Select 'Next' and allow the installation to start. 7.After a minute or so, installation will complete, close the Window. Verify environment variables 1.Go into Control Panel ->System ->Advanced System Settings.

2.Select 'Environment Variables' and then verify that the System Variables 'TMP' and 'TEMP' both contain the path 'C: EDIABAS Bin' within the 'Value' string - for instance 'C: Windows Temp;C: EDIABAS Bin'. Prepare Installation Files 1.Extract the contents of the downloaded file 'INPA_502_Updated.rar'. 2.You'll use the contents of this archive during the next three steps. Install BMW Tools 1.From the above extracted file set, find the file 'Step 1_ Install BMW Tools.exe', right-click on it and select 'Properties'.

2.Click on the Compatibility tab and change the dropdown to Windows XP SP3 as the Compatibility Mode, also tick 'Run As Administrator', then click 'Ok' 3.Double-click on the above file to start the installation. 4.Set the Destination Path C: BMW Tools (Don’t change this path - whatever it shows as leave it as that) ->'Install' ->'OK'. 5.Select 'English' ->'Continue' ->'Continue'. 6.Select 'C:' ->'Continue'. 7.Select 'Skip' ->'Next' 8.Accept the defaults for programs to update, then click 'Next'. 9.Select 'Com1', 'OBD' and 'USB to Serial Adapter' ->'Continue' ->'Continue'.

10.The installation will begin and complete. Install INPA/EDIABAS 6.4.7 and 5.0.2 1.From the above extracted file set, double-click the file 'Step 2_ Install INPA.exe'. Ezkeys Mac Keygen more. 2.The Destination Path should be 'C: temp', leave as it is and click 'Next'.